Euro Synthetic Oils - LuBoron Additives & Treatments Products

This treatment is designed to extend the life and operating range of your engine. It blends with your existing engine oil and contains boron-based components that protect vital working parts from friction and corrosive elements. The Engine Treatment actually forms a near-diamond hard surface on metal parts, providing a super-slick surface. Unlike Teflon or Mineral Oil based products, the chemistry of Boron CLS Bond is sub micrometer to micrometer size which allows the particles to penetrate into the tightest crevices between sliding metal parts. The new surface also blocks oxygen to prevent corrosive activity. This micro-layer of protection is bonded to metal surfaces with strong covalent and ionic bonds. It provides long-lasting, low-friction surface impervious to most contaminants. LuBoron Engine Oil Treatment is compatible with all engine oils and exceeds all manufacturers¡| engine warranty requirements. Base oil used meets or exceeds A.P.I. Service requirements. 16 oz (473 ml) high concentrate formula.

LuBoron ATF Treatment extends the life and lowers the operating temperature of your automatic transmission. This revolutionary product is a blend of liquid wax esters/derivatives and other elements essential to the life and performance of your transmission. It blends with your existing transmission fluid and contains boron-based components that protect vital working parts from friction and corrosive elements. It toughens rotating components, inhibits overheating, smoothes out clutch shudder, clears stuck valve bodies and locked governors, and improves shift patterns. It provides durable, long-lasting wear surfaces. Transmission performance is enhanced, wear is reduced and the life of your fluid is extended. LuBoron Automatic Transmission Treatment will mix with any automatic transmission fluid Boron CLS Bond is biodegradable. 10 oz (296 ml).

One Time Application LuBoron Gear Oil Treatment is for use in all manual transmissions, transaxles, and final drives. The primary ingredient, Boron CLS Bond, provides high temperature stability, reduces varnish/gum buildup on synchros and gears, and inhibits wear. As a result, the life of the gearbox is extended and performance is significantly enhanced. LuBoron Gear Fluid Treatment is for use in all manual transmissions, transaxles and final drives. Boron CLS Bond is biodegradable. 10 oz (296 ml).

The Boron CLS Bond® technology in the LuBoron 2-Cycle Gas Treatment will bond a near diamond-hard solid lubricant coating directly on to the engine’s metal surfaces. This is especially important for 2-cycle engines due to the excessive carbon build up and surface degradation resulting from the 2-cycle engine combustion design. The service life of the 2-cycle engine is extended 2 to 3 times longer than with standard oil only lubrication. Treatment Rate: The 2-cycles Gas Treatment product is used at a 1 to 1000 dilution ratio when mixing directly with the fuel. Add 1/8 oz to 1 gallon of gas. For 2-cycle engines with oil injection(reservoir) systems, add the LuBoron 2-Cycle Gas Treatment product at a 1 to 10 dilution ratio. For example, if the engine holds ½ half gallon of oil, add 6.4 oz of product to the oil reservoir. This is calculated as follows: 64 oz (½ gallon) divided by 10 = 6.4 oz.

Specially formulated, super strength treatment when added to engine oil creates a chemical reaction bonding directly to the metal surfaces displacing corrosion and forming a super slippery surface. Friction is dramatically reduced (up to 80%) which also means enhanced performance. Wear can be reduced as much as 90% and engine rebuilds can be significantly extended. Because this product actually bonds to the metal, generally one application is all that is necessary. It is recommended that a treatment be added after each rebuild. LuBoron Marine Engine Oil Treatment is compatible with all engine oils and exceeds all manufacturers engine warranty requirements. Base oil used meets or exceeds A.P.I. Service requirements. 16 oz (473 ml).

Just as the Marine Engine Oil Treatment is specially formulated, so is the Marine Gear Oil Treatment. LuBoron recognizes the fact that in an environment where metal is exposed to the elements a product was needed to protect components from extreme corrosion and pitting. This Boron based additive adheres to the metal surface forming a bond so strong that rust and corrosion are displaced. Naturally the performance is significantly enhanced and life of the components extended as much as 90%. LuBoron Marine Gear Oil Treatment is for use in transmissions, transaxles and final drives. Boron CLS Bond is biodegradable. 10 oz (296 ml).

LuBoron General Purpose Aerosol Lubricant has a limitless number of uses from household to industry. The most advanced friction - reducing technology commercially available. Sure to become a staple for every consumer it provides maximum lubricity, and protects against wear and corrosion in industrial, commercial, and similar applications.16 oz 296 (ml).